Water Cooled Chiller(Screw Comp.-Flooded Type)
Water Cooled Flooded Type Screw Chiller adopts shell and tube flooded evaporator, with efficient copper tubes as the heat exchanging medium, the heat exchanger greatly enhances heat transfer between the water and refrigerant, thus lowering power consumption and operation cost. Flooded chiller also adopts high efficiency screw compressor, shell and tube condenser, oil separator, electronic expansion valve, and micro-computer touch screen controller, etc. Flooded screw chillers are matched to fan coils, AHUs or other terminal units for medium, and large sized commerical air condtioning fields, such as hotels, shopping mall, CBD, library building, etc.
- Cooling capacity: 66 ÷ 1142 KW (R134A, single compressor)
- Cooling capacity: 713 ÷ 2285 KW (R134A, twin compressors)
- R22, R134A
- Hanbell screw compressor (Bitzer optional)
- Shell and tube condenser, shell and tube evaporator (anti-corrossion option)
- Micro-computer touch screen controller (can be remote control)
- PLC controller optional (Siemens); Mod-Bus (RS485) interface
- Thermal/Electronic expansion valve (Danfoss/Emerson/Sporland)
- Heat recovery optional; Inverter optional; Special voltage optional
- Modular chiller option
Water Cooled Flooded Type Screw Chiller main components:
(1) High Efficiency Screw Type Compressor
RC2 series screw compressors feature simple and robust construction by elimination of some components such as pistons, piston rings, valve plates, oil pumps which are found in reciprocating compressors. Without these components,screw compressors run with low noise level, minimized vibration, high reliability and durability.
(2) High Efficiency Condenser
Shell (refrigerant side):Carbon steel;Water tubes (water side):High efficiency copper tubes.Other tube types available on request for specific applications.
(3) High Efficiency Flooded Evaporator
The temperature drop between the refrigerant evaporation point and chilling medium outlet is constantly around 2°C to reach high heat exchange efficiency.
(4) Throttling Device
Adopt superior quality famous electronic expansion valve for optimum superheating control, bringing about high unit performance.
(5) Intellectualized Controller
Adopt micro computer touch screen controler,the temperature fluctuation of outlet chilled water can be as precise ±0.1°C. In addition, various sensors in the system can promptly transmit accurate signals and data to the controller for timely system protection and more reliable operation.(PLC controller is optional)
(6) Heat Recovery System(optional)
When working at the cooling mode, the unit can provide hot water up to 60°C free of charge using waste heat. This saves fuels for common hot water equipment, reduces waste heat and CO2 emission, and is therefore highly energy efficient and environment friendly.
Product Consultation
No. 6-4, Zi Xiang Road, Ping Shan District, Shenzhen, Guangdong Province, China.
