How to Do Daily Maintenance of Air Cooled Chillers

2020/10/16

Air-cooled chillers, as a relatively efficient refrigeration equipment in chiller products, are widely used in the industrial market and become necessary equipment for many industrial production.

 

At the same time, although the air-cooled chiller is equipped with multiple protection devices, these are all to prevent failures from directly damaging the unit. If the company wants to ensure that the air-cooled chiller has high cooling efficiency and long service life, it must remember to do regular maintenance. So, how should the normal safety maintenance and inspection of air-cooled chillers be carried out?

 

1.Check the stability of voltage and current

Let’s take power supply 380V-3PH-50HZ as an example. When the air cooled chiller works normally, the voltage is 380V, the current is normal within the range of 11A-15A;

 

2.Check the compressor regularly

The compressor is the "heart" of the chiller, and its quality directly affects the stability of the chiller. The necessary acceptance test for the chiller should be carried out in accordance with the principles of air tightness test first, vacuum test second, sub-item test first, and machine test second.

 

3.Clean regularly

In addition to checking the technical performance of the chiller, it is also important to protect the clean appearance of the chiller and the cleanliness of the work site. When the air-cooled chiller is running for 6 months, the entire system must be cleaned, such as pipes, filters, condensers, fans, etc., especially fans. Like our commonly used fans, dust will affect heat dissipation, so the cooling efficiency will directly lower.

 

4.Check the meters regularly

The temperature control meter is out of control, please replace the temperature control meter. High pressure failure, poor heat dissipation, too dirty radiator, poor ventilation, please clean the radiator, improve the ventilation conditions. The cooling fan does not work, please check whether the fan motor is burned out and short circuit, and repair or replace the motor. If high-pressure engine is damaged, please replace the high-pressure engine.

 

5.Regularly check whether the refrigerant has decreased

We can judge according to the high and low pressure gauge values on the front of the air-cooled chiller. When the chiller is running normally, the high pressure is 11-17kg, and the low pressure is 3-5kg. In shutdown state, both high pressure and low pressure are around 0.6kg.

 

The high-efficiency refrigeration function of air-cooled chillers is inseparable from the daily maintenance and safety inspection of the products, so it is very important to check the operation of air-cooled chillers.

 

In addition to the main inspections above, pay attention to checking the oil level and oil temperature of each compressor, checking the main power supply voltage and current, and checking whether the set value of the chilled water supply temperature is appropriate. If there is a problem, make changes in time.

 

If you encounter a problem you don't understand, you can consult Eurostars, with more than 12 years of maintenance experience, we believe it can help you.